All tools
Same tools as the homepage directory, listed in one place. Back to home
Interval & Format Timers
- Workout Timer
A workout timer runs a work phase and then a rest phase for as many rounds as you set before you start. You choose both lengths and the round count, so one page can time a quick pair of blocks or a longer session with many repeats. It is the general clock on this site when you want a simple session structure without picking a named format such as HIIT, Tabata, or EMOM. The page follows your numbers only. It does not name exercises or log what you did.
- AMRAP Timer
AMRAP means as many rounds as possible inside a fixed time. This timer counts that window down from the duration you set and can log a round each time you tap, so you have a simple count at the end. You decide what counts as a round and when you are done with one. Unlike EMOM, there is no fresh minute box each time. The clock does not choose the movements or verify that each round matched your plan.
- Circuit Timer
A circuit timer moves through stations in order, then repeats that list for the rounds you set. Each station uses the work time you choose, with rest only where you turn it on between stations or between full laps. Station names are labels on the clock, not a written workout card. Unlike a superset timer, this page handles a longer station list. It does not demonstrate form or tell you when to swap equipment.
- EMOM Timer
EMOM means every minute on the minute. Each round is a 60-second box: you work for the part of the minute you set, and whatever time remains in that minute is your buffer before the next minute starts. The cycle stays locked to the wall clock minute even when you change the work window, unlike a simple interval timer that only cares about work and rest lengths. You bring the task each minute. The timer does not count reps or rounds for you.
- HIIT Timer
A HIIT timer repeats a work phase and a rest phase for as many rounds as you set. You choose both lengths, so the same clock can run a short hard block or a longer effort with more recovery between rounds. HIIT here means alternating timed work and timed rest, not a fixed ratio like Tabata and not a minute-locked grid like EMOM. It follows the clock only. It does not pick the exercise, count reps, or tell you how hard to push.
- Interval Timer
An interval timer is a plain work-and-rest clock. Each round is one effort, then one recovery, until the round count you set is finished. Use it when you want interval-training framing without a named format such as HIIT presets, Tabata's 20/10 shape, or EMOM's minute boxes. Work and rest can be any lengths you enter. The tool runs the pattern. It does not choose exercises or change lengths mid-session unless you stop and edit.
- Rest Timer
A rest timer is a single countdown between efforts. Start it when a set or drill ends and wait for zero before you begin the next one. You set one rest length and can restart the same countdown as often as you need. It does not run work phases, alternate partners, move through circuit stations, or ring out combat rounds. For work plus rest repeats, use a workout, interval, or HIIT timer instead.
- Tabata Timer
Tabata timing is a short, fixed-shape interval: brief work, shorter rest, repeated for a small number of rounds. This page opens on 20 seconds of work and 10 seconds of rest for 8 rounds, and those numbers can be changed if your coach uses a different block. It times that repeating pattern only, unlike a general interval timer with any work and rest you like. It does not assign movements or treat the defaults as a required workout.
Combat Sports Timers
- BJJ Rolling Timer
A BJJ rolling timer alternates a timed roll with a timed break before the next pair or rotation starts. Many academies use rolls of about three to six minutes, but mat culture varies, so set the lengths to your rotation. It shares round-and-rest timing with other combat timers but is labeled for jiu-jitsu rolls rather than striking rounds. The clock does not score positions, award points, or track submissions.
- Boxing Round Timer
A boxing round timer alternates a timed round with a timed rest. The presets follow common gym lengths for bag work, shadow boxing, or a longer boxing block, and you can override them when your class uses different numbers. Class and competition clocks differ from what any one gym uses, so custom times are there when a preset does not match. The page is a round-and-rest clock only. It does not score rounds or cue combinations.
- Kickboxing Round Timer
A kickboxing round timer uses the same round-and-rest pattern as a striking class. It starts from two- or three-minute rounds with about a minute of rest, a common gym shape for pad rounds and bag work. Change the lengths when your session uses a different clock than the defaults. It matches boxing-style round timing in structure but opens on kickboxing-friendly presets. The tool does not teach technique or track strikes.
- MMA Round Timer
An MMA round timer uses longer work blocks than most striking-only round clocks. The default leans toward five minutes of work and one minute of rest, which many MMA classes use for drilling and sparring blocks. Amateur, pro, and gym formats are not the same, so set custom times for the session you are running. It is still a round-and-rest clock, not a judge's scorecard or a fight contract length guarantee.
- Muay Thai Round Timer
A Muay Thai round timer is built around the three-minute round many classes use, with rest between rounds before the next round starts. Some traditional formats keep a longer break than a typical boxing gym, so the custom fields are there for the clock your camp gave you. It shares the round-and-rest shape with other combat timers but opens on Muay Thai-oriented defaults. The page does not run clinch-only segments or pad assignments.
- Wrestling Drill Timer
A wrestling drill timer runs rounds and rests with starting numbers aimed at drill blocks and live goes in practice. Competition periods change by level and federation, so custom times cover a dual meet shape or a practice plan your coach wrote. It is a round-and-rest clock with wrestling-oriented defaults, not a match scoreboard. The tool does not track takedowns, riding time, or injury clocks.
Hold & Challenge Timers
- Dead Hang Timer
A dead-hang timer measures how long you hang from a bar or rings with your feet off the ground. Countdown is for a fixed goal you set in advance. Stopwatch is for a max attempt you end yourself when grip or shoulders fail. Grip style, shoulder position, and chalk stay outside the tool. It is not a pull-up rep counter and does not log multiple hangs unless you run the clock again.
- Exercise Challenge Timer
An exercise challenge timer runs a repeating work-and-rest block with an exercise name shown on the work phases. Presets start the clock for push-ups, burpees, squats, or mountain climbers so you can begin quickly. Those numbers are starting points for timing, not official test standards or ranked challenges. The timer does not count reps, judge range of motion, or verify that the movement matches the label.
- Handstand Hold Timer
A handstand hold timer measures how long you stay inverted, against a wall or freestanding depending on what you are practicing. Countdown fits a target hold you planned. Stopwatch fits an open attempt you end when you come down. The page runs the clock only. It does not teach a progression, cue alignment, or distinguish wall walks from free standing unless you note that yourself.
- Isometric Hold Timer
An isometric hold timer measures a static position: you hold still without moving through a range, and the clock records how long. Use it when the hold is not already covered by a plank, wall sit, handstand, or stretch timer on this site. You can label the hold for your own reference, but the label does not change behavior. The tool does not describe the position, check depth, or add load.
- Jump Rope Timer
A jump-rope timer alternates jump time and rest for rope sessions. The default gives about twice as much jump time as rest, which suits many interval rope workouts. Single-unders, double-unders, and footwork drills all use the same clock; you bring the skill. The tool does not count jumps, detect misses, or sync to music. For general cardio drills without a rope focus, a cardio drill timer works too.
- Plank Timer
A plank timer measures how long you hold the plank position on your forearms or hands. Countdown mode fits a target you already chose and stops at zero. Stopwatch mode fits an open attempt you end yourself when you break the hold. You can switch modes before you start, but the page does not mix both at once. The tool runs the clock only. It does not judge form, count shakes, or save history across visits.
- Wall Sit Timer
A wall-sit timer measures a static hold with your back against the wall. Countdown fits a set goal you enter before you start. Stopwatch fits an open attempt you stop when you choose to stand up. Like other hold timers on this site, it records duration only and leaves technique to you. It does not track knee angle, add weight, or compare today to a previous session unless you note it yourself.
Cardio & Endurance Timers
- Cardio Drill Timer
A cardio drill timer is a short work-and-rest clock for agility ladders, cone drills, or brief station work. The defaults favor brief, even intervals you can repeat many times without editing. Change the lengths to match the drill card your coach wrote. It is a generic work-rest repeat, not a sport-specific erg display. The tool does not choose the drill, count touches, or measure distance covered.
- Cycling Interval Timer
A cycling interval timer alternates a harder effort with an easier one on the clock. The default is equal one-minute blocks, which you can lengthen or shorten for indoor bike or outdoor ride intervals. It tracks time only, the same pattern as other land cardio interval timers but labeled for cycling sessions. Power targets, cadence, heart rate, and gear selection stay outside the page. It does not connect to a bike computer or trainer app.
- Rowing Interval Timer
A rowing interval timer runs timed pieces with timed rests between them. The default is one minute on and one minute off, a common practice shape on the erg or in a boat class. Match the lengths to your workout card rather than assuming every session uses the default. The page does not read split pace, stroke rate, or meters from a Concept2 or any other monitor. It is a work-rest clock only.
- Running Interval Timer
A running interval timer alternates an effort with a recovery on the clock. The defaults give a little more recovery than run time, which suits many track and treadmill sessions where the easy portion is still a jog. Use a walk-run timer when the easy part should be a walk, not a jog recovery. The tool does not measure pace, distance, or laps. It only signals when to run and when to recover.
- Swimming Interval Timer
A swimming interval timer times a swim effort and the rest that follows before the next rep. The defaults use a shorter rest than the land cardio timers on this site, closer to many pool sets on the wall clock. Send-off rules and leave-on-the-top formats differ by coach, so set the numbers to the set you were given. It does not count laps, strokes, or intervals from a pace clock unless you watch it yourself.
- Walk-Run Interval Timer
A walk-run timer alternates running and walking by the clock, not by feel alone. The defaults give more time to walk than to run, which is the usual shape of couch-to-5K style sessions and many beginner plans. It is the right clock when the easy portion is a walk rather than a jog recovery on a running interval timer. The page does not build a training plan or increase speed automatically each week.
Strength Training Timers
- Density Training Timer
A density training timer is a fixed window of time for work you choose before the clock starts. You log sets and reps by hand while the clock runs, tapping to add to your count for this visit only. The log is a simple counter on the page, not a saved training record across days or devices. It does not assign the exercise, rest between efforts automatically, or compare you to a leaderboard.
- Pyramid Workout Timer
A pyramid workout timer changes the stage length in a set pattern you pick before you start. Ascending adds a step each level. Descending shortens. A full pyramid rises to the longest stage and comes back down, with the peak shown once. A label you type is text on the clock; it does not change the length. Unlike a progressive interval timer, stages are distinct blocks rather than one work-rest pair that steps every round.
- Rep Tempo Timer
A rep tempo timer splits one rep into a lower phase, a bottom pause, a lift phase, and a top pause. A phase set to zero is skipped so you can run a simple down-up rhythm or a strict four-count tempo. Time under tension on this page is those phase lengths added together, then multiplied by the reps you set. That figure is arithmetic from your settings, not a measured force or bar speed.
- Set Structure Timer
A set structure timer times three ways of breaking a set apart on the clock. Cluster sets split work with a short rest inside the set, then a longer rest before the next set. Rest-pause is work, a short pause, then work again with the same load. A drop set uses a transition countdown you can use to change the load. The timer does not move the weight, count reps, or confirm you finished the prescribed reps.
- Superset Timer
A superset timer runs one pair per round: exercise A, then exercise B, with an optional transition between them and optional rest before the next round starts. It stays on two names you enter, unlike a circuit timer that walks a longer station list. Partner alternation and minute-locked EMOM work belong on other pages. The clock does not track which side failed first or log weights used.
Mobility & Recovery Timers
- Box Breathing Timer
A box breathing timer loops four timed sides in order: inhale, hold, exhale, and hold again. Equal sides are the default box shape, and you can lengthen one side or skip a side by setting it to zero. This is a clock for that repeating pattern while you breathe. It is not a breathing prescription, medical advice, or a substitute for learning breath work from a qualified instructor.
- Foam Rolling Timer
A foam rolling timer counts down each area in the order you list before you start. The preset names are labels you can edit to match your routine, and they are not a treatment plan or physical therapy script. One stretch held in place, with no list, belongs on a stretch timer instead. The page does not tell you how much pressure to use or replace professional guidance for pain.
- Routine Sequence Timer
A routine sequence timer walks through a list of named steps once, giving each step its own countdown. Yoga, Pilates, mobility, warm-up, and cooldown are presets on the same clock structure. One pose held without a list belongs on a yoga pose timer. A list of foam-rolling areas belongs on a foam rolling timer. The tool does not demonstrate movements or adjust order mid-run unless you reset.
- Stretch Timer
A stretch timer measures how long you stay in a stretch on one side or both as you choose. Countdown fits a fixed hold you set before you start. Stopwatch fits open timing when you are exploring range or stopping when tension eases. A named yoga pose has its own timer page, and a list of steps in order belongs on a routine sequence timer. This page does not prescribe which stretch to do or how deep to go.
- Yoga Pose Timer
A yoga pose timer measures one pose at a time on the clock, whether seated, standing, or inverted. Countdown fits a hold you planned before class or home practice. Stopwatch fits an open hold when you are staying until you choose to release. A flow with several named steps in sequence belongs on a routine sequence timer, not here. The page does not cue breath, alignment, or Sanskrit names beyond what you type.
Group & Gym Timers
- CrossFit Workout Timer
This page switches among four clocks used in many gym classes: a countdown AMRAP, an every-minute EMOM, repeating work-and-rest intervals, and a for-time count-up. You pick the format that matches the whiteboard, then enter the times and rounds yourself. The timer runs the format you pick; it does not publish a workout, leaderboards, or movement standards. Each mode behaves like its dedicated timer page, gathered in one switcher for convenience.
- Group Session Timer
A group session timer is a shared work-and-rest clock with a large display meant for a class or a gym floor. Bootcamp, class, and trainer are starting presets for that same clock, not lesson plans or programmed workouts. Everyone watching one screen sees the same phase change at the same time. The display does not sync other phones or tablets automatically, and it does not take attendance or assign stations.
- Partner Workout Timer
A partner workout timer gives one person a turn, then the other, then an optional rest you both share before the next round. While one name is on the clock, the other person is waiting, which suits you-go-I-go stations on one screen. It is a timing pattern for two people, not a full circuit with many stations. The timer does not assign exercises, weights, or who starts each round beyond the order you set.
Workout Calculators & Generators
- Circuit Workout Generator
A circuit workout generator names the stations, gives them one shared work length, adds rest if you want it, and totals how long the plan runs. It then opens that plan in the circuit timer so you can start immediately. Stages that each need a different length belong on a multi-stage timer instead of this generator. It does not suggest exercises beyond what you type or save plans for later visits.
- Exercise Time Calculator
An exercise time calculator adds up one exercise from the pieces you enter before you train. Rep mode treats every rep as the same number of seconds you assign. Step mode adds the times you wrote for each part, including gaps between them, plus rest between sets if you include it. It is for reps or a short sequence, not for interval rounds or full circuit laps. It does not run a live timer.
- HIIT Workout Generator
A HIIT workout generator fills in a work-and-rest pair, shows how long that plan runs for the rounds you chose, and opens it in the HIIT timer with one click. The preset buttons are timing patterns only; they do not name exercises or set an intensity level for you. You still bring the movements and effort. It is not a Tabata generator with fixed 20/10 blocks unless you enter those seconds yourself.
- Interval Workout Generator
An interval workout generator builds a custom work-and-rest plan from the lengths and rounds you enter, or fits as many full rounds as a time budget allows in budget mode. You can open that plan in the interval timer when you are ready to start. Leftover time in budget mode is unused time in the math, not an extra rest the timer will run for you. It does not name exercises or save multiple plans.
- Rest Time Calculator
A rest time calculator turns a rest rule you already chose into the break between sets in seconds. The rule can be a fixed number of seconds, the same duration as the set, twice the set, half the set, or a custom pair of parts you define. The page applies that rule to the set length you type and shows the result. It does not decide how long you should rest for recovery or strength goals.
- Tabata Workout Generator
A Tabata workout generator lays out one or more blocks, starting from 20 seconds of work, 10 seconds of rest, and 8 rounds per block. Rest between blocks counts in the total duration only when you add two or more blocks. Opening the timer starts a single block at a time; it does not run the gap between blocks as active timing on the clock. It does not assign exercises to each block.
- Work-to-Rest Ratio Calculator
A work-to-rest ratio places effort time next to recovery time so you can see the relationship at a glance. Thirty seconds of work and thirty seconds of rest is 1:1. Forty seconds of work and twenty seconds of rest is 2:1. This page shows that ratio from the seconds you type so you can set a timer with the lengths you meant. It is math only. It does not run a session or recommend a ratio for your goals.
- Workout Duration Calculator
A workout duration calculator adds the pieces of a repeating interval session: prepare time if you use it, each work phase, and the rests you choose to include between rounds. It answers how long the clock will run before you start a timer, which helps you plan a class slot or a lunch break. Partial rounds and one-off stages are outside this model. It does not run the session or open the timer for you unless you follow the link yourself.
- Workout End Time Calculator
A workout end time calculator adds a duration to a start time and shows the clock time you finish. A session that crosses midnight wraps like an ordinary clock, so late evening starts still produce a sensible finish time. Use it when you already know the length from a plan or a duration calculator and want the finish time, not a running timer on the page. It does not account for unplanned rests you take mid-session.
- Workout Rounds Calculator
A workout rounds calculator shows how many full work-and-rest cycles fit inside a time budget you enter. It is the reverse of a duration calculator: you bring the total time and the length of one round, and it returns the whole rounds that fit with leftover seconds if any. A partial round at the end is not counted as a full round. It does not run a timer or add prepare time unless you included it in your round length.
Advanced Interval Tools
- Multi-Stage Workout Timer
A multi-stage workout timer runs a list of stages that do not have to share one length. A warm-up can be two minutes and the next stage forty seconds, each with its own label on the clock. Use it when each block needs its own time rather than one work length repeated like a basic interval timer. It does not loop random lengths each round; for that, use a random interval timer instead.
- Progressive Interval Timer
A progressive interval timer keeps one work-and-rest pair and changes those lengths by a fixed step you set after each round. A positive step makes the next round longer. A negative step makes it shorter. It changes interval sizes round by round, unlike a pyramid timer that moves through separate named stages. It does not switch to a new kind of stage or randomize times within bounds.
- Random Interval Timer
A random interval timer builds each round's work and rest lengths inside the shortest and longest times you allow. It shows the full sequence before the clock starts, so the next interval is not a surprise mid-session. A new draw replaces that list when you regenerate. Unlike a progressive interval timer, lengths jump within your bounds rather than stepping by a fixed amount each round. It does not pick exercises for you.